Orders placed in the first half of December will experience a delay in processing while we work on inventory. Thank you for understanding.
M-107 Friction Leather for Start/Stop Control, as shown in the photos. 3/4 inch of round (old) leather is slightly oversize and needs to be sanded to slide snugly into the prepared hole. I use a small mixture of epoxy to set the leather plug in the hole. Part of the leather plug will stick out, as shown in the second photo. After the epoxy has dried and after checking the distance needed for the friction leather to stop the turntable, the excess is cut off using a razor blade, resulting in what is seen in the third photo. When the turntable is rotating, it should not touch the friction leather. [This sale is for the piece of leather in the plastic envelope as shown in the first photo.]